VHM 2 x x 50 Z-2 HA Кінцева радіусна твердосплавна фреза; finish; nACo; Long
| тип | Радіусні кінцеві фрези |
|---|---|
| зубців | 2 |
| Група матеріалів | P, K, S, H |
| Dc | 2 |
| Lt | 50 |
| Ds | 6 |
| r | 1 |
| Coating | nACo |
| Хвостовик | HA |
| розмір | Long |
| чистота | finish |
| Виробник | NYK |
Dc — Cutting diameter (Diameter of the cutting part of the tool)
Ds — Shank diameter (Diameter of the shank held in the holder)
Dn — Neck diameter (Diameter of the relieved neck section)
Lc — Length of cut (Length of the cutting edges / flutes)
Lt — Total length (Overall length of the tool)
Ln — Length of neck (Length of the neck section)
z — Number of teeth (Number of flutes / cutting edges)
r — Corner radius (Radius at the tool corner)
c — Chamfer (Size of the corner chamfer)
Helix — Helix angle (Angle of the flutes on the tool)
Coating — Tool coating (Protective coating, e.g., TiN, TiAlN)
Shank — Shank type (Type of shank, e.g., HA, HB, MT)
Size — Tool size / Length type (Tool size category, e.g., short, standard, long)
Surface — Milling type / Surface finish (Application type, e.g., roughing, finishing)