VHM 16 x 32 x 120 Z-3 MT1 Фреза кінцева твердосплавна напайна; finish; uncoated; XL
| тип | Кінцеві фрези з радіусом |
|---|---|
| зубців | 3 |
| Група матеріалів | P, M, K, S, H |
| Dc | 16 |
| Lc | 32 |
| Lt | 120 |
| helix | 30° |
| Coating | uncoated |
| Хвостовик | MT1 |
| розмір | XL |
| чистота | finish |
| Виробник | CN |
Dc — Cutting diameter (Diameter of the cutting part of the tool)
Ds — Shank diameter (Diameter of the shank held in the holder)
Dn — Neck diameter (Diameter of the relieved neck section)
Lc — Length of cut (Length of the cutting edges / flutes)
Lt — Total length (Overall length of the tool)
Ln — Length of neck (Length of the neck section)
z — Number of teeth (Number of flutes / cutting edges)
r — Corner radius (Radius at the tool corner)
c — Chamfer (Size of the corner chamfer)
Helix — Helix angle (Angle of the flutes on the tool)
Coating — Tool coating (Protective coating, e.g., TiN, TiAlN)
Shank — Shank type (Type of shank, e.g., HA, HB, MT)
Size — Tool size / Length type (Tool size category, e.g., short, standard, long)
Surface — Milling type / Surface finish (Application type, e.g., roughing, finishing)